Fire Protect

99  excl VAT

Wireless fire detector with temperature sensor that monitors security in the room twenty four hours a day and immediately notifies of smoke and sharp jumps in temperature.

  • Authentication to prevent forgery
  • Jamming detection and communication channels encryption
  • Tampering alarm
  • Registers smoke and sharp jumps in temperature in the room
  • Can operate independently from Ajax Hub, notifying of danger by means of a built-in siren
  • Independently tests the smoke chamber and gives prompt notification of the need to dust

Principle of operation

The device uses a photoelectric sensor to detect smoke. If no smoke is emitted, the additional detector registers temperature increase in the room.

Features

It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously.

Installation

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Specifications

ClassificationRadio channel smoke detector with temperature sensor and built-in siren
Type of detectorWireless
Installation methodIndoors
Compatibility
Operates independently or with all Ajax hubs, range extenders, ocBridge Plus, uartBridge
Sensing element
Photoelectric and temperature sensors
Activation threshold+59°С ±2°С
Type of notificationSound/light
Volume of built-in siren85 dB
Alarm signal delivery time0.15 s
False alarm filter+
Interconnected alarms+
Power supplyBattery: Two CR2 batteries, 3 V
Backup battery: CR2032
Battery life
Up to 4 years
Learn more
Jeweller radio technology
Communication range with central unit — up to 1,300 m in an open space
Two-way communication between devices
Operating frequencies — 868.0-868.6 MHz
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector polling period — 12−300 s
Learn more about Jeweller
Additional temperature sensor
Available
Operating temperature range
From 0°С to +65°С
Permissible humidity
Up to 80%
Anti-sabotage
Protection against fraud
Jamming detection
Tamper-resistant
Remote setting and testing
+
Dimensions
132 × 132 × 31 mm
Weight
220 g
WarrantyReplacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.
Complete set
FireProtect detector
SmartBracket mounting panel
2 x CR2 batteries (pre-installed)
1 x backup battery CR2032 (pre-installed)
Installation set
User’s guide
Service life
10 years

Manuals

This browser does not support PDFs. Please download the PDF to view it: Download PDF

Kategorier: ,
Updating…
  • Inga produkter i varukorgen.