This all-in-one and easy-to-install, low-cost gateway enables you to significantly extend the range of, or migrate from, existing radio systems.
Principle of operation
Installation
In less than 5 minutes, networks are integrated and ready to use.
| Channel Capacity | 1 |
| Frequency Range | VHF: 136 - 174MHz |
| Analogue Channel Spacing | 25KHz / 12.5KHz |
| Digital Channel Spacing | 12.5KHz |
| Vocoder | AMBE+2 |
| Frequency Stability | 1.5ppm |
| Antenna Impedance | 50 ohm |
| Operating Temperature | -20° to +55°C |
| Air Interface (DMR) | ETSI TS 102 361 |
| Power Output VHF (High / Mid / Low) | 5W / 2W / 1 W |
| Modulation Type | 7K60FXE / 7K60FXD, 8K0F3E, 16K0F3E |
| Distortion | 2% / 5% digital / analogue |
| Unwanted Emission | 0.25uW / 1.0uW <1GHz / >1GHz |
| Adjacent Channel Power | -60dBc |
| Digital Sensitivity | Typically -121dBm (0.2uV) for 5% BER |
| Analogue Sensitivity | Typically -121dBm (0.2uV) for 12dB Sinad |
| Rated Audio Output | 2 watts |
| Intermodulation | 42dBm |
| Adjacent Channel Selectivity | 60dB (Digital) 60 / 70 (Analogue 12.5KHz / 25KHz) |
| Spurious Response Rejection | -37dBm |
| Spurious Radiations | 2.0nW / 20nW <1GHz / >1GHz |
| Wired LAN | RTL GB LAN |
| Wireless LAN | 802.11 b/g/n |
| Operating Voltage | 12VDC / 100 - 240VAC 50 / 60Hz |
| Overall Dimensions (HxWxD) | 45mm x 275mm x 178mm |
| Weight | 1.8Kg |
Auto switch over to WiFi if Ethernet fails:
As a fall back to a wired Ethernet network the Gateway can automatically connect to a WiFi network including a simple 4G WiFi hotspot or tethered to a smartphone.
Existing radio systems will benefit from E-PoC’s / P1’s extensive range of software and devices:
